Bnc 7000 Series Programmer Manual Instrukcja Użytkownika Pobierz pdf (Strona 11)

2.10

Using SCPI for SERIES 7000

The Standard Commands for Programmable Instrumentation (SCPI) provides a uniform and

consistent language to control programmable test and measurement devices in instrumentation

systems. The SCPI Standard is built on the foundation of IEEE-488.2, Standard Codes and Formats. It

requires conformance to IEEE-488.2, but is pure software standard. SCPI syntax is ASCII text, and

therefore can be attached to any computer test language, such as BASIC, C, or C++. It can also be

used with Test Application Environments such as LabWindows/CVI, LabVIEW™, or Matlab®. SCPI is

hardware independent. SCPI strings can be sent over any instrument interface. It works equally well

over USB-TMC, GPIB, or LAN networks.

Please see the chapter 4 for detailed description of supported SCPI commands.

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901

Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected]om, Web: www.berkeleynucleonics.com

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 36 37

Brak uwag

Bnc 7000 Series Programmer Manual Instrukcja Użytkownika Strona 11