Bnc 7000 Series Programmer Manual Instrukcja Użytkownika Pobierz pdf (Strona 14)

*RST. However, cycling the instrument power will reset it to zero.

3.1.10 *SRE?

The Service Request Enable (SRE) query returns the value of the Service Request Enable Register.

Range 0–63 & 128-191

3.1.11 *STB?

The Read Status Byte (STB) query returns the value of the status byte including the master summary

status (MSS) bit.

Range 0–255

3.1.12 *TRG

The Trigger (TRG) command triggers the device if LAN is the selected trigger source, otherwise, *TRG

is ignored.

3.1.13 *TST?

The Self-Test (TST) query initiates the internal self- test and returns one of the following results:

0 This shows that all tests passed.

1 This shows that one or more tests failed.

3.1.14 *WAI

The Wait- to- Continue (WAI) command causes the instrument to wait until all pending commands are

completed, before executing any other commands.

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901

Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected]om, Web: www.berkeleynucleonics.com

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 36 37

Brak uwag

Bnc 7000 Series Programmer Manual Instrukcja Użytkownika Strona 14