Bnc 7000 Series Programmer Manual Instrukcja Użytkownika Pobierz pdf (Strona 26)

SENSe:XX:POINTs <value>

SENSe:XX:POINTs?

Sets or gets the number of points per trace.

SENSe:XX:PPDs <value>

SENSe:XX:PPDs?

Sets or gets the number of points per decade for the trace.

SENSe:TRACe:SPURious:OMISsion

SENSe:TRACe:SMOothing:APERture

SENSe: TRACe:SMOothing:STATe

:SENSe:ASET <value>

This command sets the RF step attnuator for the selected channel.

SENSe:ASET:AUTO ON|OFF|1|0

Sets step attenuator to automatic.

SENSe:XX:AVERage:COUNt {1 ~ 9999}

SENSe:XX:AVERage:COUNt?

This command sets/gets average count.

SENSe:XX:FREQuency:STARt

SENSe:XX:FREQuency:STARt?

This command sets/gets start frequency.

SENSe:XX:FREQuency:STOP

SENSe:XX:FREQuency:STOP?

This command sets/gets stop frequency.

SENSe:PN:FREQ:SPOT

This command sets the desired offset frequency spot to be measured. Upon setting of this value, the

loop bandwidth, locking time constants, as well as fourier coefficients are calculated for highest

measurement speed.

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901

Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected]om, Web: www.berkeleynucleonics.com

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 36 37

Brak uwag

Bnc 7000 Series Programmer Manual Instrukcja Użytkownika Strona 26