Bnc 1105 Universal Counter Instrukcja Użytkownika Pobierz pdf (Strona 113)

113

113113

113

generated.



If the current measurement function is Totalize or Voltage Peaks, a “0” will be

returned and error -221 will be generated.

:CALCulate2:LIMit:PCOunt[:TOTal]?

Queries the total number of measurements that pass the limit test.

Return



Numeric data transferred as ASCII bytes in <NR1> format.

Notes



If the limit test is off, a “0” will be returned and error -221 will be generated.



If there is no valid measurement result, a “0” will be returned and error -230 will be

generated.



If the current measurement function is Totalize or Voltage Peaks, a “0” will be

returned and error -221 will be generated.

:CALCulate2:LIMit:STATe <Boolean>

Defines or queries the limit test state.

Return



A single ASCII-encoded byte is returned. 0 means OFF and 1 means ON.

Notes



This will be set to OFF after the counter has been turned off or a remote interface

reset.



The limit data and the :CALC2:LIM:FAIL, :CALC2:LIM:FCO and :CALC2:LIM:PCO

information will be cleared.



Sets the limit-detect output to the in-limit voltage level.

:CALCulate2:LIMit:LOWer[:DATA] <numeric value> [HZ|S|DEG]

Sets or queries the lower limit in the limit test.

Return



Numeric value transferred as ASCII bytes in <NR3> format with eleven significant

digits.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 196 197

Brak uwag

Bnc 1105 Universal Counter Instrukcja Użytkownika Strona 113